Practise 25 questions on Indus Valley Civilisation.
0 / 25 correct · click an option to check it · +0 pts today
Q1. The discovery of Harappan Civilisation was in …….
Show answer and explanation
Answer: B
The Harappan Civilisation was formally discovered in 1921, when Daya Ram Sahni began excavations at Harappa.
Q2. Which of the following match is not correct regarding the origin of Harappan civilisation?
Show answer and explanation
Answer: A
M.R. Mughal actually argued for an indigenous origin of the Harappan civilisation from local pre-Harappan cultures, not that it was inspired by or borrowed from Mesopotamia, making this pairing incorrect.
Q3. Rangpur, where the contemporary of Harappan civilisation found, is in
Show answer and explanation
Answer: C
Rangpur, a late Harappan site contemporary with the mature civilisation, is located in the Saurashtra region of Gujarat.
Q4. Which one of the following is NOT among the causes that scholars suggest for the decline of the Harappan civilisation?
Show answer and explanation
Answer: D
The answer is a Persian conquest of the Indus cities. No source links the decline to it. Why the others fail: Scholars do suggest climate change, the drying of the Sarasvati river, a changed monsoon, crowded cities and falling trade. Some causes fit certain towns, but none explains the whole collapse. Memory hook: many slow causes, no single blow.
Q5. A seal from the Harappan civilisation shows a seated figure some scholars call a possible early Shiva. How does this claim compare to the Rudra-Shiva textual identification?
Show answer and explanation
Answer: C
This ‘proto-Shiva’ theory is far more contested than the well-established Rudra-Shiva textual link, and rests on interpretation of the seal’s imagery rather than direct textual evidence.
Q6. Which one of the following is not among the five major cities of the Harappan civilisation named in the NCERT textbook?
Show answer and explanation
Answer: D
The answer is Lothal. The textbook names five major cities: Rakhigarhi, Mohenjodaro, Harappa, Dholavira and Ganweriwala. Why the others fail: Each of these four is on that list. Lothal is a port near sources of carnelian, so it is important, but it is not among the five. Memory hook: Lothal is a port, not one of the five.
Q7. Which place of Harappan civilisation is located in Maharashtra? I. Harappan II. Mohenjodaro III. Diamabad IV. Surkotda
Show answer and explanation
Answer: B
Among the listed sites, only Daimabad is located in Maharashtra; Harappa and Mohenjodaro are in Pakistan and Surkotada is in Gujarat.
Q8. Which place of Harappan civilisation is located in Maharashtra? [UPPSC 2010] I. Harappan II. Mohenjodaro III. Diamabad IV. Surkotda Select the correct answer using codes given below.
Show answer and explanation
Answer: B
Among Harappan-affiliated sites, the ones located in present-day Maharashtra include Daimabad, matching the combination given in option (b).
Q9. The Harappan Civilisation covered an expensive area of present South Asia. The geographic area covered by this civilisation included
Show answer and explanation
Answer: D
The Harappan Civilisation’s geographic spread covered Punjab, Sindh, parts of the North-Western Frontier, Kathiawar (Gujarat), and parts of the Ganga-Yamuna Doab — the most extensive and accurate description among the options.
Q10. Which of the following is related to Harappa civilisation?
Show answer and explanation
Answer: B
Harappa is one of the principal cities of the Indus Valley Civilisation, of which it is the type-site.
Q11. From where the evidence of rock-cut architecture were found, with reference to Harappa civilisation?
Show answer and explanation
Answer: B
Dholavira has yielded evidence of rock-cut structures, distinguishing it from the mostly brick-built architecture of other Harappan cities.
Q12. Harappan cubical weights were cut mostly from which material?
Show answer and explanation
Answer: C
Harappan weights are mostly cubes cut from banded grey chert, though a few used slate, alabaster, quartzite, or jasper instead.
Q13. Which stone was most often used for Harappan cubical weights?
Show answer and explanation
Answer: C
The answer is banded chert. Most weights are cubes of banded grey chert from the Rohri hills in Sindh. Why the others fail: the sources do not list marble, granite or sandstone for the cubes. Memory hook: chert cubes.
Q14. Many Harappan cubical weights are balanced to within 0.5-1% of their intended value, held consistently across a territory larger than modern Pakistan. What does this precision best point to?
Show answer and explanation
Answer: C
That level of precision, held consistently across such a huge territory, points to organised trade. It may also point to some shared administrative standard, even without direct evidence of a central authority.
Q15. How is the Late Harappan phase best described?
Show answer and explanation
Answer: D
Artefacts and settlements point to a rural way of life. Urban settlement and internal trade also declined.
Q16. Which animal is notably absent from Mature Harappan sites, with remains only at Late Harappan sites?
Show answer and explanation
Answer: C
Horse remains are limited to Late Harappan sites. The Mature phase, about 2600 to 1900 BCE, shows no secure horse evidence.
Q17. Which of these Harappan sites had its entire settlement fortified?
Show answer and explanation
Answer: D
At Dholavira and Lothal the entire settlement was fortified, according to NCERT. UNESCO also describes walled zones at Dholavira.
Q18. Which one of the following is not the characteristic feature of the Harappan settlement?
Show answer and explanation
Answer: D
Harappan drains and water chutes from upper storeys were built into the outer walls of houses so waste flowed directly into street drains, not enclosed inside the wall structure as this option claims.
Q19. From which one of the following factory sites were limestone and chert blades mass produced and sent to various Harappan settlement in Sindh?
Show answer and explanation
Answer: A
Limestone and chert blades were mass-produced at factory sites in the Sukkur and Rohri Hills and distributed to various Harappan settlements.
Q20. What were the smallest known Harappan weight and the most common (16-ratio) weight, by mass?
Show answer and explanation
Answer: A
The smallest known Harappan weight was 0.856 grams. The most common weight, the 16-ratio unit, weighed 13.65 grams.
Q21. Which ratio gives the most common Harappan weight, about 13.7 grams?
Show answer and explanation
Answer: D
The answer is the 16th ratio. It weighs about 13.7 grams. Why the others fail: the 1st ratio is the base unit of about 0.86 gram. The heaviest known weight at Mohenjo-daro is 10,865 grams. Memory hook: sixteenth, thirteen-seven.
Q22. The Harappan weight system followed a binary progression (1, 2, 4, 8, 16, 32…) up to what value, above which it switched to decimal multiples of 16?
Show answer and explanation
Answer: B
The binary progression ran up to 12,800; above that point the system switched to decimal multiples of 16, letting Harappans handle both small daily transactions and large-scale trade with the same underlying units.
Q23. Which of the following is a Harappan port?
Show answer and explanation
Answer: B
Lothal, with its dockyard on the Bhogava river near the Gulf of Khambhat, served as a major port town of the Harappan civilisation.
Q24. Which among the following has not been found from Harappan places?
Show answer and explanation
Answer: D
The Harappans were a Bronze Age people who used copper, gold, and silver, but iron has not been found at their sites, since ironworking developed later in the subcontinent.
Q25. Harappan people were first in which production?
Show answer and explanation
Answer: B
The Harappans are credited as among the earliest people in the world to cultivate cotton and produce cotton textiles.
Share your thoughts