MCQ Questions
🔍 Search
Menu

Electricity and Magnetism Practice — MCQs with Answers (Set 1)

Practise 25 questions on Electricity and Magnetism.

0 / 25 correct · click an option to check it

Q1. Which instrument is specifically used to measure the value of electric current in a circuit?

Show answer and explanation

Answer: D

An ammeter is calibrated specifically to give a numerical reading of current, distinct from a galvanometer, which mainly just detects a current’s presence.

Q2. Which instrument specifically detects the mere presence of electric current in a circuit, without necessarily measuring its exact value?

Show answer and explanation

Answer: B

A galvanometer is a sensitive instrument that detects small currents, showing their presence and rough direction, though it’s not calibrated for precise measurement the way an ammeter is.

Q3. Starch-iodide paper is specifically used as a test for the presence of a(n)?

Show answer and explanation

Answer: C

An oxidising agent converts iodide ions into elemental iodine, which then forms a distinctive blue-black complex with starch, revealing its presence.

Q4. Step-up transformers are specifically used for?

Show answer and explanation

Answer: D

A step-up transformer raises AC voltage, while correspondingly lowering current, since an ideal transformer keeps input and output power roughly equal.

Q5. Assertion (A): A transformer is useful for stepping up or stepping down voltages. Reason (R): A transformer is a device specifically used in DC circuits. Which is correct?

Show answer and explanation

Answer: C

Assertion A is correct. Reason R is false, though — transformers work specifically with alternating current, since they need a continuously changing magnetic flux to function at all.

Q6. Among a transformer, a diode, a capacitor, and a transistor, which component is used as an amplifying device?

Show answer and explanation

Answer: D

Only a transistor can amplify a weak electrical signal into a stronger one — transformers, diodes, and capacitors don’t provide signal gain on their own.

Q7. Which device is used to convert alternating current (AC) into direct current (DC)?

Show answer and explanation

Answer: C

A rectifier uses components like diodes to allow current to flow in only one direction, converting alternating current into direct current.

Q8. Why can’t an ordinary DC ammeter accurately measure alternating current (AC)?

Show answer and explanation

Answer: B

A DC ammeter effectively responds to the average current over time. Since a symmetric AC waveform averages to zero across a full cycle, a simple DC ammeter shows no meaningful reading at all.

Q9. In a step-down transformer, the AC output current, compared to the input current, is?

Show answer and explanation

Answer: A

Since an ideal transformer conserves overall power, a step-down transformer’s reduced output voltage is accompanied by a correspondingly increased output current.

Q10. What is the actual purpose of using a transformer in a circuit?

Show answer and explanation

Answer: C

A transformer works only with AC, since it relies on a continuously changing magnetic flux — it cannot function to convert AC to DC, or work with steady DC input at all.

Q11. During a short-circuit condition, what happens to the current flowing in the circuit?

Show answer and explanation

Answer: C

A short circuit drastically lowers a circuit’s resistance, and since current equals voltage divided by resistance, current surges dramatically as a result.

Q12. Which is the correct circuit of a reflex arc?

Show answer and explanation

Answer: A

This is the standard reflex arc pathway, routing through the spinal cord rather than the brain for speed.

Q13. A circuit’s fuse is rated for 5 A. At most how many 100 W, 220 V bulbs can be safely run in parallel on this circuit?

Show answer and explanation

Answer: C

Each bulb draws about 100 ÷ 220 ≈ 0.4545 A. Dividing the fuse’s 5 A rating by this per-bulb current allows a maximum of 11 bulbs without exceeding the rating.

Q14. Which of these instruments must be connected in parallel within an electric circuit?

Show answer and explanation

Answer: A

A voltmeter measures potential difference across a component, so it must sit in parallel with that component, without diverting significant current away from the main circuit.

Q15. Which property must a fuse wire have so that it protects a circuit from an excess current?

Show answer and explanation

Answer: B

A fuse wire must conduct electricity so normal current passes through it, but have a low melting point, so it melts and breaks the circuit when current exceeds a safe limit.

Q16. The law stating that the total current entering a circuit junction always equals the total current leaving it is?

Show answer and explanation

Answer: D

Kirchhoff’s First Law, or the junction rule, is a direct consequence of the conservation of electric charge at any circuit junction.

Q17. In a p-n junction, avalanche current specifically flows when the diode is?

Show answer and explanation

Answer: B

Avalanche breakdown is specifically a reverse-bias phenomenon, occurring once the reverse voltage becomes large enough to trigger a rapid multiplication of charge carriers.

Q18. Avalanche breakdown in a reverse-biased diode is caused by?

Show answer and explanation

Answer: A

Under strong reverse bias, minority carriers accelerate enough to collide with the lattice and dislodge additional electron-hole pairs, setting off a rapidly multiplying avalanche of current.

Q19. A p-n junction diode’s one-way current flow makes it especially useful as a?

Show answer and explanation

Answer: B

Since a diode lets current flow easily in only one direction, it’s ideally suited to converting alternating current into a one-directional, rectified output.

Q20. A steady incompressible flow passes from area 4 cm² at 1 m/s into area 2 cm². What is the second speed?

Show answer and explanation

Answer: C

Continuity gives A₁v₁ = A₂v₂. Therefore v₂ = (4/2) × 1 = 2 m/s. Halving area doubles speed for this unbranched flow. Keeping speed unchanged would halve the volume flow rate.

Q21. To avoid slipping while walking on ice, one should take smaller steps because?

Show answer and explanation

Answer: C

Smaller steps reduce the horizontal force needed at each step, working within ice’s naturally small available friction.

Q22. Which precautions help avoid overloading a domestic electrical circuit?

Show answer and explanation

Answer: D

A properly rated fuse, a reasonable appliance load, and well-maintained appliances all work together to prevent dangerous circuit overloads.

Q23. Regarding electrical insulator materials, which statement is correct?

Show answer and explanation

Answer: B

An insulator’s electrons are tightly bound to their atoms, unable to move freely and carry current, unlike the loosely bound electrons in a conductor.

Q24. Which of these materials is both very hard and very ductile?

Show answer and explanation

Answer: C

Tungsten combines exceptional hardness with enough ductility to be drawn into the fine wire used for light-bulb filaments.

Q25. Which of these materials behaves as an Ohmic conductor?

Show answer and explanation

Answer: D

Silver, an ordinary metal, obeys Ohm’s Law closely across a wide range of conditions, unlike semiconductors such as germanium, silicon, or many forms of carbon.

Beyond the answer

    Share your thoughts

    ✨Ask doubt
    ✨ Ask a Question AI×

    MCQ Question is an independent study site, not affiliated with any government body or exam authority. Official sources: UPSC upsc.gov.in · SSC ssc.gov.in · NCERT ncert.nic.in · PIB pib.gov.in

    WhatsApp support: +91 9319788829