Practise 25 questions on Electricity and Magnetism.
0 / 25 correct · click an option to check it · +0 pts today
Q1. Which pair of electrode materials is commonly used in the rechargeable batteries found in devices like torchlights and electric shavers?
Show answer and explanation
Answer: C
Nickel-cadmium, or Ni-Cd, cells were a long-standard rechargeable battery choice for small portable devices such as torchlights and electric shavers.
Q2. Walking on a woollen carpet and then touching a metal door handle sometimes produces a small electric shock. Why?
Show answer and explanation
Answer: A
Friction with the carpet builds up static charge on your body. Touching a conductor like a metal handle lets that charge suddenly discharge, producing a small shock.
Q3. Who is credited as the first person to isolate methane gas, discovering it could be exploded with an electric spark when mixed with air?
Show answer and explanation
Answer: C
Alessandro Volta isolated methane from marsh gas in 1776 and demonstrated its explosive combustion with an electric spark.
Q4. Which of the following appliances carries a mandatory BEE Star Label in India? 1. Ceiling fans 2. Electric geysers 3. Tubular fluorescent lamps
Show answer and explanation
Answer: B
BEE’s current list places all three categories under mandatory labelling. This is not the verbatim UPSC question. The 2016 question asked where a BEE Star Label could be found. BEE’s NECA 2016 scheme placed tubular fluorescent lamps in its mandatory group. It placed ceiling fans and electric storage water heaters in its voluntary group. That classification describes the document’s snapshot, not the status for all of 2016. A separate BEE regulation lists water-heater labelling rules dated 7 September 2016.
Q5. Regarding Ohm’s Law, which statement is NOT correct?
Show answer and explanation
Answer: D
Even normally Ohmic, homogeneous materials can deviate from Ohm’s Law once the applied field becomes extremely strong — the law only reliably holds within a limited, practical range.
Q6. Ohm’s Law describes the relationship specifically between?
Show answer and explanation
Answer: D
Ohm’s Law states that potential difference across a conductor is directly proportional to the current through it, at constant temperature.
Q7. Consider these statements: (I) Ohm’s Law fails at very low and very high temperatures, (II) Ohm’s Law applies to semiconductors in general, (III) Ohm’s Law does not apply to electron tubes, discharge tubes, or electrolytes, and (IV) conductance, resistance’s reciprocal, is measured in siemens. Which are correct?
Show answer and explanation
Answer: C
Statements I, III, and IV are all correct. Statement II is false — semiconductors are actually a classic example of non-Ohmic behaviour, which is exactly why diodes and transistors work the way they do.
Q8. According to Ohm’s law, if the potential difference across a conductor doubles while its resistance stays constant, what happens to the current through it?
Show answer and explanation
Answer: C
At fixed resistance, I = V/R. Doubling voltage therefore doubles current. Four times would require a different change. An unchanged current would require resistance to double too. Halving current would require a lower voltage or higher resistance.
Q9. What does a potential difference of 6 V mean?
Show answer and explanation
Answer: C
One volt equals one joule per coulomb. Six volts therefore describes six joules of energy change per coulomb. Coulombs per second measure current. Ohms measure resistance. Power also depends on current, so voltage alone does not determine watts.
Q10. A load draws a constant 1 kW for two hours. How much electrical energy does it use?
Show answer and explanation
Answer: D
Energy equals power multiplied by time. The load uses 1 × 2 = 2 kWh, equivalent to 7.2 × 10⁶ J. Two kilowatts measures power. Half a kilowatt-hour divides instead of multiplying. The listed joule value equals only one kilowatt-hour.
Q11. A parallel plate capacitor with air between its plates has capacitance C. If the air gap is filled with a dielectric of dielectric constant 7, what does the capacitance become?
Show answer and explanation
Answer: C
Inserting a dielectric multiplies a capacitor’s capacitance by the dielectric constant, so capacitance becomes 7 times its original value, C.
Q12. Two blocks of ice fuse together into a single block when pressed firmly against each other. Why does this happen?
Show answer and explanation
Answer: A
Since ice is less dense than liquid water, applying pressure favours the denser liquid phase, lowering ice’s melting point at the contact surface enough to briefly melt and then refreeze, fusing the two blocks together.
Q13. What output does a simple rotating-coil generator with a split-ring commutator provide?
Show answer and explanation
Answer: D
The commutator makes the external output unidirectional. Its magnitude still varies, giving pulsating DC rather than constant current. Rotation changes flux, so emf can be produced. A simple slip-ring arrangement instead gives alternating output.
Q14. When water is heated using a resistive coil connected to the domestic power supply, its temperature rise depends on: (I) the supply voltage, (II) the current through the coil, and (III) the time for which voltage is supplied. Which of these matter?
Show answer and explanation
Answer: A
Heat produced follows H = I²Rt, or equivalently depends on both voltage and current together with time — all three factors affect the water’s temperature rise.
Q15. Assertion (A): All liquids conduct electricity. Reason (R): Under conditions of low pressure and high voltage, liquids can be made to conduct. Which is correct?
Show answer and explanation
Answer: D
Not all liquids conduct electricity under ordinary conditions — pure water and many oils are poor conductors. But under specific extreme conditions of low pressure and high voltage, even normally non-conducting liquids can be made to conduct.
Q16. A ball is thrown vertically upward at 25.2 m/s. Roughly how long does it take to reach the highest point of its journey?
Show answer and explanation
Answer: C
Time to reach the highest point equals initial velocity divided by gravitational acceleration: 25.2/9.8 ≈ 2.57 seconds.
Q17. In quantum mechanics, the magnetic quantum number of an electron specifically describes its orbital’s?
Show answer and explanation
Answer: A
The magnetic quantum number specifies how an orbital is oriented in three-dimensional space, relative to an external magnetic field.
Q18. Consider these statements about aerogel: (I) it is a nano-porous material, and (II) silica aerogel is an excellent thermal insulator. Which is correct?
Show answer and explanation
Answer: A
Both statements hold true — aerogel’s structure is riddled with nanoscale pores, and this very structure is precisely what gives silica aerogel its exceptional insulating properties.
Q19. Large transformers gradually heat up during extended use. This happens because: (I) current flowing through the windings produces heat, and (II) hysteresis loss occurs as the core is repeatedly magnetised and demagnetised. Which of these cause the heating?
Show answer and explanation
Answer: B
Both resistive (I²R) losses in the windings and hysteresis losses in the core generate heat during a transformer’s operation, gradually warming it up.
Q20. A current of 2 A flows through a 5 ohm resistor for 10 seconds. Using Joule’s law, H equals I squared R t, how much heat is produced?
Show answer and explanation
Answer: D
H = I squared multiplied by R multiplied by t = (2 x 2) x 5 x 10 = 200 J, since heat is proportional to the square of the current.
Q21. Lenz’s Law, which gives the direction of an induced current, is a consequence of the conservation of?
Show answer and explanation
Answer: D
Lenz’s Law states that induced current always opposes the change that produced it — if it didn’t, energy could be created from nothing, violating conservation of energy.
Q22. Positive rays observed in a discharge tube are considered very similar in nature to?
Show answer and explanation
Answer: A
Positive rays consist of positively charged ions, making them comparable in nature to alpha particles, which are also positively charged.
Q23. Electromagnetic induction is best described as?
Show answer and explanation
Answer: C
Electromagnetic induction specifically refers to an electric current being induced in a coil whenever there’s relative motion, or a changing field, between the coil and a nearby magnet.
Q24. A fuse is best described as a device that is?
Show answer and explanation
Answer: D
A fuse combines all three traits: it’s a safety device, typically made from a tin-lead alloy, specifically chosen for its low melting point.
Q25. A modem is best described as a device that?
Show answer and explanation
Answer: C
The word ‘modem’ itself is a blend of modulator and demodulator, reflecting its dual role in converting signals between digital and transmittable analogue forms.
Share your thoughts