Practise 25 questions on Heat and Thermodynamics.
0 / 25 correct · click an option to check it · +0 pts today
Q1. Regarding evaporation, consider: (I) evaporation causes cooling, (II) evaporation happens at every temperature, while boiling only happens at the boiling point, and (III) evaporation is fundamentally a surface phenomenon. Which of these is correct?
Show answer and explanation
Answer: D
All three statements hold true — evaporation cools a liquid, can happen at any temperature (unlike boiling), and only takes place at the liquid’s exposed surface.
Q2. During the evaporation of a liquid, what happens to its enthalpy?
Show answer and explanation
Answer: A
Evaporation absorbs heat to overcome intermolecular forces between liquid molecules. This absorbed heat raises the system’s enthalpy.
Q3. During the isothermal expansion of an ideal gas, what happens to its enthalpy?
Show answer and explanation
Answer: B
An ideal gas’s enthalpy depends only on temperature. Since temperature stays constant in an isothermal process, enthalpy stays unchanged too.
Q4. An ideal gas follows PV² = constant. Which temperature-volume relation follows?
Show answer and explanation
Answer: B
Use P = nRT/V in PV² = constant. The result is nRTV = constant. Fixed n and R give TV = constant.
Sources: IIT Bombay polytropic processes; NASA ideal-gas equation.
Q5. When a gas is compressed at constant temperature, what happens at the molecular level?
Show answer and explanation
Answer: C
Compressing a gas packs its molecules closer together, so even though their speeds stay the same at constant temperature, they collide with each other far more often.
Q6. What is the approximate numerical value of Planck’s constant?
Show answer and explanation
Answer: B
Planck’s constant, a fundamental constant linking a photon’s energy to its frequency, has an approximate value of 6.6 × 10⁻³⁴ joule-seconds.
Q7. At which temperature do the Fahrenheit and Celsius scales show the exact same numerical reading?
Show answer and explanation
Answer: B
Setting the Fahrenheit and Celsius conversion formulas equal to each other and solving gives −40 — the one point where both scales agree numerically.
Q8. Regarding how temperature affects viscosity, which is correct?
Show answer and explanation
Answer: A
Gases and liquids behave oppositely: a gas’s viscosity rises with temperature, while a liquid’s viscosity drops rapidly as it warms.
Q9. Viscosity is the property by which liquids?
Show answer and explanation
Answer: C
Viscosity resists sliding between neighbouring fluid layers. Attraction to unrelated molecules is not its definition. Conductivity describes electrical behaviour. Repelling neighbouring molecules does not define viscous resistance.
Q10. Which of these is NOT one of physics’ fundamental quantities?
Show answer and explanation
Answer: C
Weight is a force, so it is a derived quantity. Length, time and mass are SI base quantities. Weight is measured in newtons; mass is measured in kilograms.
Q11. Among the quantities q+w, q alone, w alone, and H-TS, which are genuine thermodynamic state functions?
Show answer and explanation
Answer: B
q+w equals the change in internal energy, and H-TS equals Gibbs free energy — both are state functions. Heat (q) and work (w) alone are not, since both depend on the path taken.
Q12. The density of water, at exactly 1 gram per cubic centimetre, is strictly valid at which temperature?
Show answer and explanation
Answer: B
Water’s density of exactly 1 g/cc is strictly valid at 4°C, the temperature at which water reaches its maximum density.
Q13. What actually happens to the density of water as it freezes into ice?
Show answer and explanation
Answer: A
Water’s density decreases as it freezes — ice is less dense than liquid water, which is precisely why ice floats rather than sinks.
Q14. At what temperature does water reach its maximum density?
Show answer and explanation
Answer: B
Water’s density is at its maximum at 4°C, an unusual property compared with most other liquids.
Q15. A solution containing the maximum possible amount of dissolved solute, at a given temperature, is called a?
Show answer and explanation
Answer: A
A saturated solution has dissolved as much solute as it possibly can hold at that specific temperature, with any excess remaining undissolved.
Q16. Flowering triggered by exposure to low temperature is called what?
Show answer and explanation
Answer: D
Vernalisation describes this cold-triggered flowering response, distinct from the light-based photoperiodism.
Q17. Substances used to bring down body temperature during high fever are called what?
Show answer and explanation
Answer: C
Antipyretics are the specific term for fever-reducing medications.
Q18. Body temperature is regulated mainly by which brain structure?
Show answer and explanation
Answer: D
The hypothalamus acts as the body’s thermostat, regulating temperature homeostasis.
Q19. We feel cool when sitting near a fan mainly because?
Show answer and explanation
Answer: C
A fan doesn’t cool the air — it speeds up airflow across your skin, which speeds up the evaporation of sweat. That evaporation draws heat from your body, producing the cooling sensation.
Q20. Why can evaporation cool liquid water left behind?
Show answer and explanation
Answer: A
Higher-energy molecules preferentially escape. Cooling redistributes energy; it creates none. Remaining molecules still move, and radiation remains possible.
Q21. While a liquid is actively boiling, its temperature?
Show answer and explanation
Answer: B
During boiling, all the added heat goes into the latent heat of vaporisation, converting liquid to gas, rather than raising the liquid’s temperature further. Temperature stays constant until boiling is complete.
Q22. Burns caused by steam are typically much more severe than burns from boiling water at the same temperature, mainly because?
Show answer and explanation
Answer: B
As steam condenses back into liquid water on contact with skin, it releases its latent heat of vaporisation, delivering extra energy on top of the heat from its temperature alone.
Q23. Among benzene, hexane, naphthalene, and anthracene, which one burns WITHOUT producing a sooty flame?
Show answer and explanation
Answer: C
Hexane, a saturated aliphatic hydrocarbon, burns cleanly, while the aromatic compounds benzene, naphthalene, and anthracene tend to burn with a sooty flame.
Q24. The innermost region of a candle flame has which relative temperature?
Show answer and explanation
Answer: A
The innermost zone contains unburnt vapour that hasn’t yet combusted, making it the coolest part of the flame.
Q25. Land surface temperature is measured directly by which of the following?
Show answer and explanation
Answer: A
Thermal infrared sensors on satellites such as INSAT-3D and Landsat measure land surface temperature directly from the heat objects radiate. NDVI, by contrast, tracks plant health.
Share your thoughts