Practise 22 questions on Heat and Thermodynamics.
0 / 22 correct · click an option to check it · +0 pts today
Q1. Which statement about heat and temperature change is NOT correct?
Show answer and explanation
Answer: D
The temperature at which a solid turns into a liquid is called the melting point, not the boiling point — boiling point refers specifically to the liquid-to-gas transition.
Q2. A given substance’s latent heat, at its normal phase-change temperature and pressure, is best described as?
Show answer and explanation
Answer: B
Latent heat is a fixed property of a given substance at a specific phase-change temperature and pressure — for instance, water’s latent heat of vaporisation is about 540 calories per gram at 100°C.
Q3. Which of these correctly pairs a phase-change process with the transformation it describes?
Show answer and explanation
Answer: A
Evaporation converts liquid to gas, sublimation converts solid directly to gas, freezing converts liquid to solid, and melting converts solid to liquid — each name maps to one specific transformation.
Q4. Assertion (A): Adding a piece of ice to a drink cools it down. Reason (R): The melting ice draws latent heat from the drink, cooling it in the process. Which is correct?
Show answer and explanation
Answer: A
As ice melts, it must absorb latent heat from its surroundings, including the drink. Drawing that heat out of the drink is exactly what cools the drink down.
Q5. What is the latent heat of fusion of ice, approximately?
Show answer and explanation
Answer: D
The correct answer is 334 J/g (about 80 cal/g). This is the heat needed to melt ice into water at 0°C, with no change in temperature.
Q6. How much heat is needed to melt 10 g of ice already at 0°C into water at 0°C? (Use latent heat of fusion ≈ 334 J/g.)
Show answer and explanation
Answer: C
The correct answer is 3340 J. Heat = mass × latent heat = 10 g × 334 J/g = 3340 J; no specific-heat term is needed since the ice is already at 0°C.
Q7. At fixed pressure, what does added heat mainly do while pure ice melts at its melting point?
Show answer and explanation
Answer: B
At fixed pressure, pure ice uses latent heat while its temperature remains constant. The energy changes phase. It does not make specific heat zero.
Q8. Assertion (A): Ferromagnetic substances do not obey the simple form of Curie’s Law. Reason (R): At the Curie point, a ferromagnetic substance begins behaving as a paramagnetic substance. Which is correct?
Show answer and explanation
Answer: B
Ferromagnetic substances follow the more complex Curie-Weiss law rather than simple Curie’s Law. Reason R is also true, but describes behaviour specifically above the Curie point, not a full explanation of A.
Q9. Hydrogen gas can be conveniently used as vehicle fuel if absorbed at low temperature by a substance and released later using exhaust heat. What is this genuine storage substance, found in India?
Show answer and explanation
Answer: B
Certain metal hydride compounds absorb and release hydrogen gas reversibly, offering a practical storage method for hydrogen-fuelled vehicles.
Q10. The principle stating that heat lost by one substance equals heat gained by another, in a closed system, is called the?
Show answer and explanation
Answer: C
The principle of calorimetry states that, in an isolated system, heat lost by a hotter substance equals heat gained by a cooler one — the basis for calculating heat exchange.
Q11. For which type of process is the change in entropy zero?
Show answer and explanation
Answer: C
A reversible adiabatic process, with no heat exchange and no irreversibility, keeps a system’s entropy exactly constant — this specific case is also called an isentropic process.
Q12. What is the entropy of a perfectly crystalline solid at absolute zero, according to the third law of thermodynamics?
Show answer and explanation
Answer: C
The third law of thermodynamics states that a perfectly ordered crystal has zero entropy at absolute zero. There is no disorder left to measure.
Q13. Which law of thermodynamics specifically introduces the concept of entropy?
Show answer and explanation
Answer: C
The second law of thermodynamics introduces entropy. It states that a system’s total entropy tends to increase over time.
Q14. For a system and its surroundings that are together in equilibrium, what happens to their combined entropy?
Show answer and explanation
Answer: B
At equilibrium, a system and its surroundings exchange no net energy or matter. Their combined entropy therefore stays constant over time.
Q15. Among crystallisation of sucrose from solution, rusting of iron, melting of ice, and vaporisation of camphor, in which process does entropy decrease?
Show answer and explanation
Answer: C
Crystallisation packs molecules into an ordered lattice, lowering disorder. The other three processes all increase a system’s overall disorder.
Q16. Match List I (Process) with List II (Type of change) and select the correct answer using the code given below the Lists:
| List I | List II |
|---|---|
| A. Heating Camphor | 1. Chemical |
| B. Cooling of water vapour up to room temperature | 2. Evaporation |
| C. Cooking an egg | 3. Condensation |
| D. Formation of water vapour at room temperature | 4. Sublimation |
Show answer and explanation
Answer: A
Heating camphor turns it straight from solid to gas, skipping the liquid stage — sublimation (A-4). Cooling water vapour back to room temperature turns it back into liquid water — condensation (B-3).
Cooking an egg permanently changes its proteins, so it can never turn back into raw form — a chemical change (C-1). Water turning into vapour at room temperature, without boiling, is ordinary evaporation (D-2).
So the correct matching code is A-4, B-3, C-1, D-2, making option (a) the answer.
Q17. The change of liquid water into water vapour is classified as a?
Show answer and explanation
Answer: B
Turning to vapour only changes water’s physical state, not its chemical identity, making this a physical change.
Q18. When ammonium chloride is dissolved in water, the resulting solution feels noticeably cold. Which term correctly classifies this change?
Show answer and explanation
Answer: A
Correction to the source material: dissolving ammonium chloride absorbs heat from its surroundings, cooling the solution. This is a standard endothermic dissolution, not supercooling.
Q19. When a thermodynamic system completes one full cycle of changes, returning exactly to its starting state, its net change in internal energy is?
Show answer and explanation
Answer: C
Internal energy is a state function, depending only on the system’s current state, not its history. Returning to the exact same starting state means the net change over a full cycle must be zero.
Q20. The Sun’s temperature is measured using which type of instrument?
Show answer and explanation
Answer: C
A pyrometer measures extremely high temperatures, like the Sun’s surface, from a distance, based on the radiation it emits, without needing direct contact.
Q21. In a polytropic process PVⁿ = constant for an ideal gas, which single value of the exponent n makes the process adiabatic for a diatomic gas with γ = 7/5?
Show answer and explanation
Answer: D
The correct answer is n = 7/5. An adiabatic process, where no heat enters or leaves the gas, always has n equal to γ (Cp/Cv). n = 0 is isobaric and n = 1 is isothermal instead — those are different named processes, not this diatomic gas’s own γ value.
Q22. A fixed amount of ideal gas follows P = kT, where k is constant. Which process occurs?
Show answer and explanation
Answer: C
Combine P = kT with PV = nRT. This gives V = nR/k, which is constant. The process is therefore isochoric.
Sources: OpenStax ideal gas law; NPTEL thermodynamic processes.
Share your thoughts