Practise 25 questions on Landforms Rocks and Plate Tectonics.
0 / 25 correct · click an option to check it · +0 pts today
Q1. Bailadila, an important iron-ore mining region in Chhattisgarh, primarily yields which grade of iron ore?
Show answer and explanation
Answer: A
Bailadila’s hematite deposits rank among the highest-quality iron ore reserves in India. This high-grade ore is a significant contributor to India’s iron and steel industry, and to Chhattisgarh’s substantial mineral wealth. Ore from this region is also exported internationally, given its high iron content and quality.
Q2. Kiruna, a major iron ore mining region often referenced in geography, is located in?
Show answer and explanation
Answer: A
Kiruna sits in northern Sweden, well within the Arctic Circle. It’s home to one of the world’s largest underground iron ore mines. Its high-quality magnetite ore has made it a globally significant iron ore producing region for over a century.
Q3. The Mesabi Range, one of the world’s most significant iron ore regions, is located in?
Show answer and explanation
Answer: A
The Mesabi Range lies in Minnesota, within the broader Lake Superior region of the United States. It has historically been one of the largest sources of iron ore in North America. Its ore fed much of the growth of the American steel industry throughout the 20th century.
Q4. Rich reserves of iron ore in India are most closely associated with which geological rock system?
Show answer and explanation
Answer: A
The Dharwar rock system is especially mineral-rich, containing substantial iron ore deposits alongside other significant metallic minerals. Major iron-ore-producing states like Odisha, Jharkhand and Karnataka draw heavily on these Dharwar-era rock formations. This closely mirrors the earlier established fact that the Gondwana system, by contrast, holds most of India’s coal reserves.
Q5. The Chota Nagpur Plateau is often called India’s mineral heartland because it is built from which type of rock, rich in coal, iron ore, and mica?
Show answer and explanation
Answer: A
The Chota Nagpur Plateau is built from Precambrian rocks, among the oldest on Earth, rich in coal, iron ore, mica, and bauxite.
Q6. Which plateau region is nicknamed “the Ruhr of India” for its concentration of coal, iron ore, and steel plants?
Show answer and explanation
Answer: C
The Chotanagpur Plateau is called the Ruhr of India, hosting major steel plants at Jamshedpur, Bokaro, Rourkela, and Durgapur, built on coal, iron ore, manganese, and mica.
Q7. Which region, spanning Jharkhand, Odisha, West Bengal, and Chhattisgarh, holds coal, iron ore, bauxite, and mica together?
Show answer and explanation
Answer: C
The Chhotanagpur Plateau region concentrates coal, iron ore, bauxite, and mica together across these four states.
Q8. Iron ore, coking coal and limestone are needed for steelmaking in roughly which ratio?
Show answer and explanation
Answer: B
The Class X textbook gives the ratio as about 4:2:1. Some manganese is added to harden the steel. Class X Chapter 6 lists iron ore, coking coal and limestone as the chief raw materials. Class XII Chapter 5 says limestone is essential for smelting iron ore.
Q9. Among the different types of iron ore, which is generally considered the highest quality, given its high iron content?
Show answer and explanation
Answer: A
Magnetite contains roughly 60-70% pure iron, along with distinctive magnetic properties that give it its name. It’s often called ‘black ore’ because of its dark colour. Hematite is more abundant globally and easier to mine, but it generally contains a somewhat lower iron content than magnetite.
Q10. Along mountain elevation gradients, biodiversity generally tends to be?
Show answer and explanation
Answer: A
Lower mountain elevations typically offer milder temperatures and more abundant resources, supporting a greater range of species. As altitude increases, harsher conditions, including colder temperatures and thinner air, progressively limit the number of species able to survive there. This pattern closely parallels the broader latitudinal biodiversity gradient seen across the whole globe.
Q11. Biodiversity generally follows a well-documented latitudinal pattern, tending to be?
Show answer and explanation
Answer: A
Tropical regions near the equator generally support significantly more species than temperate or polar regions further away. This pattern reflects the greater warmth, sunlight and rainfall typically found near the equator, all supporting more abundant and varied plant and animal life. The Amazon rainforest, sitting almost directly on the equator, is often cited as the world’s single most biodiverse region.
Q12. Deforestation directly causes biodiversity loss and topsoil erosion, but is not a direct cause of which of these?
Show answer and explanation
Answer: D
Species invasion is typically driven by human introduction of non-native species, not deforestation itself.
Q13. Fluvial erosion, caused by the flow of rivers, characteristically produces which type of valley?
Show answer and explanation
Answer: A
Rivers cut downward into the landscape, particularly in their upper, faster-flowing stages. This vertical erosion produces a distinctive narrow, V-shaped valley cross-section. As a river matures and slows down, its focus shifts more toward lateral erosion, gradually widening its valley and forming broader floodplains.
Q14. Zoji La connects the Kashmir Valley to which other region?
Show answer and explanation
Answer: B
Zoji La connects the Kashmir Valley to Ladakh, and is a key link on the Srinagar-Leh highway.
Q15. In the UPSC CSP 2022 pairs, which region was wrongly matched with Spain?
Show answer and explanation
Answer: B
Cabo Delgado is a province of Mozambique, not Spain. Catalonia is in Spain.
Q16. Which one of the following volcano-country pairs is correctly matched?
Show answer and explanation
Answer: C
Nevado Sajama, Bolivia’s highest peak at 6,542 metres, is correctly paired with Bolivia. Nevado del Ruiz and Galeras are both in Colombia, not Peru or Ecuador, and Misti overlooks Arequipa in Peru, not Bolivia.
Q17. Consider the following pairs (Place of Pilgrimage — Location): 1. Srisailam — Nallamala Hills, 2. Omkareshwar — Satmala Hills, 3. Pushkar — Mahadeo Hills. Which of the above pairs is/are correctly matched?
Show answer and explanation
Answer: A
Srisailam lies in the Nallamala hills, in the Nallamala ranges of the Eastern Ghats. So pair 1 is right. The other two pairs are not correctly matched in the exam key, so the answer is 1 only.
Q18. Which hills lie to the north of the Palakkad Gap?
Show answer and explanation
Answer: C
The Nilgiri hills lie to the north. The Anaimalai hills lie to the south.
Q19. From South to North, what is the correct sequence of the western Himalayan ranges?
Show answer and explanation
Answer: C
This sequence runs from the outer ranges near the plains to the high Karakoram in the far north.
Q20. At about what speed does the Nazca Plate move towards the South American Plate?
Show answer and explanation
Answer: B
The Nazca Plate moves east at about 79 mm a year. It sinks under South America in a process called subduction. This builds the Andes and feeds their volcanoes.
Q21. Which tectonic plate subducts beneath the South American Plate, building the Andes and fuelling its volcanoes?
Show answer and explanation
Answer: D
The Nazca Plate, an oceanic plate under the eastern Pacific, dives beneath the South American Plate at roughly 6 to 10 centimetres a year. That collision built the Andes and creates the magma that feeds its volcanoes, including Tungurahua.
Q22. The Mariana Trench formed through subduction, where one tectonic plate is forced beneath another. Which plate is subducted beneath which?
Show answer and explanation
Answer: A
The old, dense Pacific Plate is subducted beneath the smaller Mariana Plate, a process that has been ongoing for over 50 million years.
Q23. The Himalaya formed through the collision of which two tectonic plates, roughly 50 million years ago?
Show answer and explanation
Answer: A
The Himalaya formed when the Indian Plate collided with the Eurasian Plate, roughly 50 million years ago, thrusting land upward into a fold-mountain range.
Q24. In the Himalaya, at which altitude band do blue pine and spruce appear?
Show answer and explanation
Answer: C
The correct answer is 2,225-3,048 m. Oak and chestnut grow at 1,000-2,000 m. Chir pine grows at 1,500-1,750 m. Silver fir, birch and rhododendron grow at 3,000-4,000 m. Memory hook: blue pine sits just above the oak belt.
Q25. At approximately what altitude does the Ganga’s ultimate source, the Gangotri Glacier at Gaumukh, lie?
Show answer and explanation
Answer: B
The Gangotri Glacier at Gaumukh, the Ganga’s ultimate source, lies at an altitude of about 3,892 metres in Uttarakhand.
Share your thoughts