Practise 25 questions on Energy Materials and Engineering.
0 / 25 correct · click an option to check it · +0 pts today
Q1. Under India’s 2025 rare earth magnet incentive push, what is the approximate 2030 production target and the approximate scheme size?
Show answer and explanation
Answer: D
The correct answer is about 6,000 tonnes a year by 2030, backed by a roughly ₹7,280 crore incentive scheme. The other figures belong to related but different numbers: 10,000 tonnes is IREL’s Gudur plant capacity, ₹1,500 crore is the separate recycling push, 400 tonnes is IREL’s current NdPr oxide output, and ₹200 crore is the minimum qualifying investment.
Q2. Which mineral is India’s primary source of rare earth elements, and under which law is it classified as a ‘prescribed substance’?
Show answer and explanation
Answer: D
The correct answer is Monazite, under the Atomic Energy Act, 1962. Monazite also contains radioactive thorium, so its mining and processing need central government approval.
Q3. Consider the following statements: 1. The Global Ocean Commission grants licences for seabed exploration and mining in international waters. 2. India has received licences for seabed mineral exploration in international waters. 3. ‘Rare earth minerals’ are present on seafloor in international waters. Which of the statements given above are correct?
Show answer and explanation
Answer: B
It’s the International Seabed Authority, not the ‘Global Ocean Commission,’ that grants seabed licences. India holds ISA licences for polymetallic nodule exploration in the Central Indian Ocean Basin. Rare earth minerals do occur in seafloor nodules and crusts in international waters.
Q4. Consider the following statements: Statement I: Scientific studies suggest that a shift is taking place in the Earth’s rotation and axis. Statement II: Solar flares and associated coronal mass ejections bombarded the Earth’s outermost atmosphere with tremendous amount of energy. Statement III: As the Earth’s polar ice melts, the water tends to move towards the equator. Which one of the following is correct in respect of the above statements? [UPSC CSE Prelims 2025]
Show answer and explanation
Answer: C
The correct answer is (c) — only one of Statements II and III is correct, and that one explains Statement I.
Statement I is true: NASA-funded studies (using GRACE satellite gravity data) confirm the Earth’s spin axis has been drifting, and its rotation rate slowly changing, over the past century.
Statement III is true and is the actual explanation. As polar ice sheets and glaciers melt, meltwater moves into the oceans and redistributes toward lower latitudes, away from the poles. This shifts mass away from the rotation axis and changes Earth’s moment of inertia — the same physics as a spinning skater slowing down when they extend their arms. That change in mass distribution is what causes the axis to drift and rotation to change.
Statement II is true as a fact on its own — solar flares and coronal mass ejections do strike the upper atmosphere with huge amounts of energy — but it does not explain Statement I. That energy is absorbed by the magnetosphere and thermosphere (driving space weather, geomagnetic storms, and satellite drag), not the mass redistribution needed to shift the solid Earth’s rotation axis.
Q5. The atomic bomb dropped on Nagasaki in 1945 used which fissile material?
Show answer and explanation
Answer: D
The Nagasaki bomb used plutonium-239 as its fissile core.
Q6. The 1945 Hiroshima atomic bomb, unlike the Nagasaki bomb, used which fissile material?
Show answer and explanation
Answer: A
The Hiroshima bomb used highly enriched uranium-235.
Q7. Which of the following items is used in the household wirings to prevent accidental fire in case of short circuit?
Show answer and explanation
Answer: D
During a short circuit, current suddenly surges far beyond what the wiring is designed to handle safely. An electric fuse contains a thin metal wire built specifically to melt once current crosses that dangerous level, breaking the circuit instantly before the wiring can overheat and catch fire.
Insulated wire, plastic switches, and non-metallic coatings only guard against shock and stray contact, not a genuine current surge — none of them can actually break the circuit the way a fuse does.
So the electric fuse is the real safety device here, making option (d) the answer.
Q8. “3D printing” has applications in which of the following? 1. Preparation of confectionery items 2. Manufacture of bionic ears 3. Automotive industry 4. Reconstructive surgeries 5. Data processing technologies
Show answer and explanation
Answer: D
3D printing genuinely has applications across all five areas listed: confectionery, bionic ears, automotive parts, reconstructive surgery implants, and data-visualisation printing.
Q9. Consider the following areas: 1. Confectionery, 2. Bionic ears, 3. Automotive industry, 4. Reconstructive surgeries, 5. Data processing technologies. In which of these can 3D printing be used?
Show answer and explanation
Answer: A
3D printing has uses in all five areas. Food products, implants and prosthetics, circuit boards and car parts are all in the national strategy. A bionic ear was printed in 2013 using a cell-seeded gel.
Q10. The National Steel Policy, 2017 targets how much steel capacity by 2030, and roughly how much scrap will that need each year?
Show answer and explanation
Answer: B
The National Steel Policy, 2017 targets 300 million tonnes of steel capacity by 2030, which would need 70-80 million tonnes of scrap a year — well above today’s domestic supply.
Q11. Roughly how much of India’s steel scrap is currently imported each year, to fill the gap left by domestic supply?
Show answer and explanation
Answer: D
India imports roughly 7 million tonnes of steel scrap a year, alongside about 25 million tonnes of domestic supply.
Q12. The Vehicle Scrappage Policy and the Steel Scrap Recycling Policy are related but distinct. Which best describes the difference?
Show answer and explanation
Answer: B
The Steel Scrap Recycling Policy is the general scrap-sourcing and processing framework; the Vehicle Scrappage Policy is one specific feeder stream into it, covering old vehicles.
Q13. Which policy promotes Metal Scrapping Centres, formalising the collection and processing of India’s metal scrap?
Show answer and explanation
Answer: C
The Steel Scrap Recycling Policy, 2019 promotes Metal Scrapping Centres, formalising collection, dismantling, and processing of scrap.
Q14. Roughly what share of India’s total electricity does coal-based thermal capacity currently supply?
Show answer and explanation
Answer: C
Coal-based capacity still supplies roughly 70% of India’s total electricity.
Q15. As of December 2025, roughly what was India’s total operational pumped-storage project (PSP) capacity?
Show answer and explanation
Answer: B
As of 31 December 2025, India had about 7,175.6 MW of pumped-storage capacity operational, across 10 projects.
Q16. Roughly what is India’s assessed national potential for pumped-storage projects, as of early 2026?
Show answer and explanation
Answer: C
India’s assessed pumped-storage potential crossed 280 GW as of early 2026, expanding sharply in recent years.
Q17. In what context is the term pumped-storage hydropower appropriately and currently discussed?
Show answer and explanation
Answer: C
The answer is long duration energy storage. The US DOE calls pumped-storage hydropower a proven energy storage technology. The Ministry of Power links PSPs to long-duration energy storage and balancing power. UPSC asked this in Question 38 of its 2024 General Studies Paper I, Set A. The UPSC key for Series A gives (c).
Q18. Roughly how long can a zinc-air battery run on a single charge, compared to a similar-size lithium-ion battery?
Show answer and explanation
Answer: C
Zinc-air batteries can run for 10 to 14 hours on a charge, well above the 2 to 4 hours typical of many similar-size lithium-ion batteries, making them attractive for long, low-power use.
Q19. With reference to Unmanned Aerial Vehicles (UAVs), consider the following statements: 1. All types of UAVs can do vertical landing. 2. All types of UAVs can do automated hovering. 3. All types of UAVs can use battery only as a source of power supply. How many of the statements given above are correct? [UPSC CSP 2025]
Show answer and explanation
Answer: D
The correct answer is None. All three statements use “all types”, and one counterexample makes each false. Statement 1 is false because a fixed-wing UAV needs a landing area. The Mississippi State page says this. Statement 2 is false because hovering is a multi-rotor strength, and a fixed-wing UAV gets its lift from forward flight. Statement 3 is false because the Shadow 200 runs on a fuel engine and the Zephyr S ran on solar power. Only one, only two and all three are wrong because none of the statements holds for every type. Memory hook: “all types” is a trap.
Q20. As of 2026, roughly what outlay did India’s Cabinet Committee on Security approve for the AMCA stealth fighter’s Full-Scale Engineering Development?
Show answer and explanation
Answer: C
The Cabinet Committee on Security approved ₹15,000 crore for the AMCA’s Full-Scale Engineering Development in March 2024, with a first flight targeted for 2028-29.
Q21. Assertion (A): Canal-top solar plants cost more than ground-mounted plants. Reason (R): They need elevated steel structures, and mounting is about 40% of capex. Which one of the following is correct?
Q22. Which statement about CL-20 is correct?
Show answer and explanation
Answer: D
CL-20 is among the most powerful non-nuclear explosives. Its detonation velocity is 9.38 km per second, against 9.10 for HMX. It is very sensitive, so coatings and co-crystals are studied.
Q23. CL-20 is named after which place?
Show answer and explanation
Answer: A
CL-20 is named after the China Lake facility of the Naval Air Weapons Station in California. Dr Arnold Nielson first made it in 1987, says PIB.
Q24. What is the common characteristic of CL-20, HMX, and LLM-105?
Show answer and explanation
Answer: B
All three are high explosives used in military munitions. HMX and CL-20 can be ingredients in solid propellants, but they are known as explosives, not fuels. None is a refrigerant.
Q25. Which DRDO laboratory in Pune works on high-energy materials, including Indian CL-20?
Show answer and explanation
Answer: A
HEMRL in Pune is the DRDO laboratory for high-energy materials. A 2010 PIB release reported Indian CL-20 made in the laboratory. HEMRL and Premier Explosives produced about 100 kg. Premier’s factory is in Nalgonda district.
Share your thoughts