Practise 25 questions on Light Sound and Waves.
0 / 25 correct · click an option to check it · +0 pts today
Q1. A concave mirror is used in vehicle headlights specifically because, with the bulb positioned at its focus, it?
Show answer and explanation
Answer: B
Placing the bulb at a concave mirror’s focus makes the reflected rays travel out roughly parallel to each other, projecting a strong, far-reaching beam down the road.
Q2. If objects in a rear-view mirror appear enlarged and upside down, which type of mirror is being used?
Show answer and explanation
Answer: A
Enlarged and inverted images specifically indicate a concave mirror, with the object positioned beyond its focal point — convex mirrors never invert an image.
Q3. Modern car side mirrors often carry the warning, ‘objects in mirror are closer than they appear.’ Which type of mirror needs this warning?
Show answer and explanation
Answer: D
A convex mirror shrinks images down, which makes objects look farther away — and smaller — than they truly are, hence the warning.
Q4. The reflector inside a searchlight is typically which type of mirror?
Show answer and explanation
Answer: B
A searchlight’s concave reflector, with its bulb at the focus, converts the bulb’s scattered light into a strong, focused, roughly parallel beam.
Q5. If your reflection in a mirror consistently looks smaller than you actually are, what type of mirror are you looking into?
Show answer and explanation
Answer: D
A convex mirror always diminishes the image, making it appear smaller than the real object, regardless of distance.
Q6. What is the centre of curvature of a spherical mirror?
Show answer and explanation
Answer: B
The centre of curvature is the centre of the complete sphere that the curved mirror is cut from — a fixed geometric reference point.
Q7. What is the principal focus of a spherical mirror?
Show answer and explanation
Answer: B
The principal focus is where rays travelling parallel to the axis converge, for a concave mirror, or appear to spread out from, for a convex mirror, after reflecting.
Q8. The centre point of a spherical mirror’s reflecting surface is specifically called its?
Show answer and explanation
Answer: A
The pole is the geometric centre point on the mirror’s own reflecting surface, distinct from the centre of curvature or the focus.
Q9. A curved mirror whose reflecting surface curves inward, like the inside of a bowl, is called a?
Show answer and explanation
Answer: A
A concave mirror’s reflecting surface bulges inward, away from the viewer, unlike a convex mirror, whose surface bulges outward.
Q10. Regarding lens and mirror sign conventions, which statement is NOT correct?
Show answer and explanation
Answer: B
This has the convention backwards: a convex, converging lens has positive power, while a concave, diverging lens has negative power.
Q11. Why are Webb’s mirror segments coated with a thin layer of gold?
Show answer and explanation
Answer: A
Gold reflects infrared light well, so that is the answer. The layer is only 100 nanometres thick. It sits on beryllium, which makes each segment strong and light. Blocking solar heat is the job of the sunshield, not the gold. Lightness comes from the beryllium, not the gold. Folding comes from the segmented design. Memory hook: gold for infrared, beryllium for strength.
Q12. A concave mirror has f = −10 cm and u = −30 cm. What is v in the Cartesian convention?
Show answer and explanation
Answer: A
Use 1/v = 1/f − 1/u. Substitution gives −1/10 + 1/30 = −1/15 cm⁻¹. Therefore, v = −15 cm. The negative sign locates the real image in front of the mirror. Positive choices would place it behind the mirror. The −30 cm choice incorrectly keeps image distance equal to object distance.
Q13. Regarding convex and concave lenses, which statement is NOT correct?
Show answer and explanation
Answer: B
A concave, diverging lens always produces only a virtual, upright, diminished image, regardless of object position — it can never produce a real image, unlike a convex lens.
Q14. A person holding a pen in their left hand sees their mirror reflection appearing to hold the pen in the right hand. This swap is due to?
Show answer and explanation
Answer: C
A plane mirror’s image is laterally inverted — left and right appear swapped, even though up and down stay the same.
Q15. A colour-blind person cannot differentiate between which pair of colours, in the most common form?
Show answer and explanation
Answer: A
Red-green colour blindness is the most common form, caused by specific cone-cell deficiencies.
Q16. How does a common white LED lamp produce white light from a blue LED?
Show answer and explanation
Answer: C
Blue light excites a phosphor, which then glows in red and green. All the colours together look white. A second method uses red, green and blue LEDs side by side, and the eye mixes them. An LED has no heated filament, because it turns electricity directly into light. White LEDs contain no mercury, unlike fluorescent lamps. Glass does not change a colour into white. Memory hook: blue plus phosphor makes white.
Q17. Which semiconductor material did both the Nagoya University team and Shuji Nakamura use for the blue LED?
Show answer and explanation
Answer: B
Gallium nitride, or GaN, is the answer. Akasaki, Amano and Nakamura all chose it. Growing good GaN crystals and making a p-type layer in it were very hard. Many researchers preferred zinc selenide, which they thought more promising. That bet did not pay off. Silicon and germanium do not give efficient blue light. Memory hook: GaN won the blue race.
Q18. Regarding Pyrex glass, its low thermal expansion is the key property that explains what practical advantage?
Show answer and explanation
Answer: B
Because Pyrex expands only minimally when heated, it resists the sudden internal stresses that would otherwise crack ordinary glass.
Q19. For a concave mirror with the object placed between its pole and focus, where does the resulting image form?
Show answer and explanation
Answer: C
With the object that close to the mirror, the concave mirror forms a virtual image, which appears to be located behind the mirror’s surface.
Q20. For a concave mirror, with an object placed between its focus F and pole P, which of these statements about the resulting image is NOT correct?
Show answer and explanation
Answer: C
An image forming at infinity would only happen for an object placed exactly at the focus itself — with the object between F and P, the image instead forms behind the mirror, at a finite distance.
Q21. When an object is placed between a concave mirror’s pole and its focus, what size is the resulting image?
Show answer and explanation
Answer: B
With the object between the pole and the focus, a concave mirror produces a virtual image that is enlarged, like in a shaving mirror.
Q22. An object sits between a concave mirror’s centre of curvature and its focus. Where does the resulting image form?
Show answer and explanation
Answer: B
With the object between the centre of curvature and the focus, a concave mirror forms a real, inverted, enlarged image beyond the centre of curvature.
Q23. In a concave mirror, if an object is placed exactly at the centre of curvature, where does the image form?
Show answer and explanation
Answer: D
When an object sits exactly at the centre of curvature, its image forms at that exact same point — real, inverted, and the same size as the object.
Q24. An object is placed at the centre of curvature of a concave mirror. Where does the real image form?
Show answer and explanation
Answer: C
The correct answer is at the centre of curvature itself, same size as the object. This is a special case of the mirror formula: when u = 2f, v also equals 2f, so image and object coincide there.
Q25. An object sits at the centre of curvature of a concave mirror with a 16 cm focal length. If it’s then moved 8 cm closer, toward the focus, what happens to its image?
Show answer and explanation
Answer: A
The object was originally at 32 cm (twice the focal length). Moving it 8 cm closer places it at 24 cm — between the centre of curvature and the focus — where a concave mirror forms a real, magnified image.
Share your thoughts