Practise 25 questions on Light Sound and Waves.
0 / 25 correct · click an option to check it · +0 pts today
Q1. The Tyndall effect specifically refers to which optical phenomenon of light, as seen in colloidal mixtures?
Show answer and explanation
Answer: A
The Tyndall effect describes how small colloidal particles, suspended in a mixture, scatter light passing through it, often making a light beam visibly traceable.
Q2. The propagation of a light signal along an optical fibre relies primarily on which optical phenomenon?
Show answer and explanation
Answer: C
Light entering an optical fibre repeatedly undergoes total internal reflection off the fibre’s inner walls, letting it travel long distances with minimal loss.
Q3. A simple periscope, letting you see over an obstacle, works based on which phenomenon of light?
Show answer and explanation
Answer: A
A periscope uses two angled plane mirrors to reflect light along a bent path, letting the viewer see around corners or over obstacles.
Q4. A common fluorescent tube light works by exciting a small amount of?
Show answer and explanation
Answer: B
Inside a fluorescent tube, an electric discharge excites mercury vapour, which emits ultraviolet light that then causes the tube’s phosphor coating to glow visibly.
Q5. During normal operation, the main function of a fluorescent tube light’s choke is to?
Show answer and explanation
Answer: B
Once the fluorescent tube ionises and its resistance drops sharply, the choke’s inductive reactance limits and regulates the current, preventing it from rising to a damaging level.
Q6. The ‘choke’ commonly used with a tube light is fundamentally what type of component?
Show answer and explanation
Answer: A
A tube light’s choke is simply an inductor coil, used to help start the discharge and then regulate current once the tube is lit.
Q7. In an X-ray tube, if the accelerating potential difference is doubled while the filament-to-target distance stays fixed, what happens to the cut-off wavelength of the emitted X-rays?
Show answer and explanation
Answer: C
The cut-off wavelength is inversely proportional to the accelerating voltage, so doubling that voltage halves the shortest wavelength the tube can produce.
Q8. The filament inside a traditional incandescent light bulb is made from which metal?
Show answer and explanation
Answer: A
Tungsten’s very high melting point lets it glow white-hot to produce light, without actually melting.
Q9. One parsec is approximately equal to how many light years?
Show answer and explanation
Answer: D
One parsec is approximately equal to 3.26 light years.
Q10. The splitting of white light into its constituent colours by a prism is called?
Show answer and explanation
Answer: B
Dispersion is the specific name for a prism splitting white light into its range of component colours, based on each colour’s different refractive index.
Q11. A soap bubble displays swirling colours when lit by ordinary white light. This effect is due to?
Show answer and explanation
Answer: C
Light reflecting off the bubble’s outer and inner surfaces travels slightly different path lengths, interfering constructively or destructively at different wavelengths, producing the swirl of colours.
Q12. As a ray of light enters a glass slab from air, which of its properties changes?
Show answer and explanation
Answer: C
A light wave’s frequency is fixed by its source and never changes across a medium boundary. Its velocity and wavelength, however, both change as it enters a new medium.
Q13. Which instrument takes Webb’s deep images in near-infrared light?
Show answer and explanation
Answer: C
Correct because NIRCam is Webb’s near-infrared camera, built for deep imaging of the early universe. MIRI sees mid-infrared light, while NIRSpec captures spectra of many objects at once.
Q14. Which Webb instrument observes mid-infrared light from 5 to 28 microns?
Show answer and explanation
Answer: C
MIRI is the answer. It gives images and spectra in the mid-infrared, from 5 to 28 microns. It studies cool dust disks and very distant galaxies. NIRCam covers 0.6 to 5 microns instead. NIRSpec works in the near-infrared and can study more than 100 objects at once. NIRISS is the fourth instrument and shares its slot with the guidance sensor. Memory hook: M for mid-infrared.
Q15. The Normalized Difference Vegetation Index compares which two kinds of reflected light?
Show answer and explanation
Answer: A
Near-infrared and red (visible) light are the two kinds. The formula is NDVI = (NIR − RED) / (NIR + RED), using the red band of visible light. Healthy leaves absorb visible light and reflect near-infrared light. So green plants give a high value. Ultraviolet, X-rays, microwaves and gamma rays are not used in this index. Thermal infrared is used for temperature, not for NDVI. Memory hook: NDVI is a near-infrared against red contest.
Q16. Fused quartz has a refractive index of 1.46, and sapphire has a refractive index of 1.77. If Vq is light’s speed in quartz and Vs is its speed in sapphire, which relation holds?
Show answer and explanation
Answer: A
A higher refractive index means light travels slower in that medium. Since sapphire’s refractive index is higher than quartz’s, light moves faster through quartz: Vq is greater than Vs.
Q17. Einstein’s prediction about light bending near the Sun was first confirmed during which event?
Show answer and explanation
Answer: B
Einstein’s prediction about light bending near the Sun was first confirmed during a solar eclipse in 1919.
Q18. According to modern physics, light is composed of small discrete particles, called?
Show answer and explanation
Answer: C
Photons are the discrete quanta, or particles, that make up light and other electromagnetic radiation.
Q19. Regarding photochromic lenses, consider: they darken on exposure to ultraviolet light, and this property is due to embedded microcrystals of silver chloride. Are both correct?
Show answer and explanation
Answer: C
Photochromic lenses contain tiny silver chloride crystals that darken reversibly when struck by ultraviolet light.
Q20. Which of these is NOT a common practical use of a concave mirror?
Show answer and explanation
Answer: C
Vehicle rear-view mirrors specifically use convex mirrors, for their wide field of view — concave mirrors are used instead in torches, shaving mirrors, and headlights.
Q21. Amorphous silica finds practical use specifically in?
Show answer and explanation
Answer: A
Amorphous silicon, derived from silica, is used to manufacture certain types of thin-film photovoltaic solar cells.
Q22. Aerogel, a remarkable ultra-lightweight nanomaterial, finds practical use in?
Show answer and explanation
Answer: A
Aerogel’s extraordinarily low thermal conductivity makes it valuable as an insulating material in construction, despite being almost entirely made of air.
Q23. Which function explains a use of hydrogel wound dressings?
Show answer and explanation
Answer: C
Hydrogel dressings can help manage moisture at the wound surface. Their performance depends on the formulation and the wound context. This use does not establish universal superiority or guarantee faster healing in every case.
Q24. Dentists commonly use which type of mirror to closely examine a patient’s teeth?
Show answer and explanation
Answer: A
A concave mirror, held close to the teeth, produces a magnified, easier-to-examine image, unlike a flat or convex mirror.
Q25. Which type of mirror is used in vehicle headlights?
Show answer and explanation
Answer: D
A concave mirror, with the bulb placed at its focus, reflects light forward as a strong, roughly parallel beam — ideal for a headlight.
Share your thoughts