MCQ Questions
🔍 Search
Menu

Mechanics Motion and Measurement Practice — MCQs with Answers (Set 18)

Practise 25 questions on Mechanics Motion and Measurement.

0 / 25 correct · click an option to check it

Q1. Zero acceleration for a moving body implies that its velocity is?

Show answer and explanation

Answer: A

Zero acceleration means the body’s velocity remains uniform, neither increasing nor decreasing.

Q2. Regarding a body with non-zero acceleration, which is correct?

Show answer and explanation

Answer: B

Since acceleration is defined as the rate of change of velocity, a non-zero acceleration means velocity cannot stay constant.

Q3. A body is said to have non-uniform acceleration when?

Show answer and explanation

Answer: A

Non-uniform acceleration occurs when either the magnitude, the direction, or both change during the motion.

Q4. For a body moving with uniform acceleration, its final velocity can be found using which relation?

Show answer and explanation

Answer: B

Under uniform acceleration, final velocity equals twice the average velocity minus the initial velocity, since average velocity is the mean of initial and final velocity.

Q5. The kinetic energy of a moving body depends upon which two factors?

Show answer and explanation

Answer: C

Kinetic energy depends on a body’s mass and its velocity, following the formula KE = ½mv².

Q6. Regarding the energy of a body, which is correct?

Show answer and explanation

Answer: A

A body’s energy is its capacity to do work, and energy itself is a scalar quantity, not a vector.

Q7. The elastic potential energy stored in a deformed body equals?

Show answer and explanation

Answer: A

A body’s elastic potential energy equals the work the external force does against the deforming (restoring) force.

Q8. The Bureau of Energy Efficiency (BEE) was established as a statutory body under which legislation?

Show answer and explanation

Answer: C

BEE was set up under the Energy Conservation Act, 2001, and functions under India’s Ministry of Power.

Q9. When a body slides across a surface, the friction it experiences is called?

Show answer and explanation

Answer: B

Sliding means the contact surfaces move relative to each other. Their friction is kinetic, also called dynamic friction. Static friction acts without relative sliding. Limiting friction is the maximum static value just before slipping. Rolling alone does not necessarily involve sliding at contact.

Sources: NCERT; OpenStax

Q10. A body rolling down a hill, part-way through its descent, possesses?

Show answer and explanation

Answer: D

Partway down a hill, a rolling body has already converted some potential energy into kinetic energy, so it possesses both simultaneously.

Q11. If a body is acted upon by two unequal forces in opposite directions that are not along the same line, what results?

Show answer and explanation

Answer: D

Unequal, non-collinear opposite forces produce both a net translational force and a net torque, causing both types of motion together.

Q12. If action and reaction forces were to act on the same body rather than on two different bodies, what would follow?

Show answer and explanation

Answer: A

If action and reaction acted on the same body, they would cancel out exactly, leaving zero net force and no motion — which is precisely why they must act on different bodies.

Q13. A man is sitting in a train moving at 60 km/h. What is his speed relative to the train itself?

Show answer and explanation

Answer: D

Since the man moves with the train, his speed relative to the train itself is zero.

Q14. A 10 g bullet is fired at 20 m/s from a 2 kg gun. What is the gun’s recoil velocity?

Show answer and explanation

Answer: C

By conservation of momentum, the gun’s recoil velocity equals (0.01 kg × 20 m/s) ÷ 2 kg = 0.1 m/s.

Q15. Why does a fired gun recoil with much less velocity than the bullet’s own velocity?

Show answer and explanation

Answer: A

Since the gun-bullet system’s total momentum is conserved and the gun is much heavier, its recoil velocity must be correspondingly much smaller than the bullet’s velocity.

Q16. Why does a cannon recoil backward after firing?

Show answer and explanation

Answer: C

A cannon recoils because of Newton’s Third Law — the forward force propelling the shell generates an equal, opposite backward force on the cannon.

Q17. An ideal projectile has initial vertical velocity 10 m/s. With g = 10 m/s², how far above launch does it rise?

Show answer and explanation

Answer: B

At the peak, vertical velocity is zero. Maximum rise is H = uᵧ²/(2g) = 100/20 = 5 m. The numerical value 1 comes from the time-to-peak calculation, not height. Ten and twenty metres do not satisfy the maximum-height equation for these inputs.

Q18. Water has density 1,000 kg/m³. Taking g = 10 m/s², what extra pressure does a 2 m water column produce?

Show answer and explanation

Answer: D

The liquid-column contribution is ρgh. Multiplying 1,000 × 10 × 2 gives 20,000 Pa. Total pressure also includes the pressure at the water surface. The question asks only for the water-column contribution.

Q19. As water is heated from 0°C to 10°C, its volume?

Show answer and explanation

Answer: D

Because of water’s density anomaly, its volume first shrinks as it warms from 0°C to about 4°C, then expands normally as it continues warming from 4°C to 10°C.

Q20. A 0.20 kg ball moving at 10 m/s stops without bouncing in 0.10 s. What is the average net force magnitude?

Show answer and explanation

Answer: A

The momentum-change magnitude is 0.20 × 10 = 2 N·s. Divide by 0.10 s to obtain 20 N. The 2 N choice confuses impulse with force. The 100 N choice would require 0.02 s. The 200 N choice uses a tenfold error.

Q21. Using a 10% transfer model, producers provide 10,000 kJ. How much reaches secondary-consumer production?

Show answer and explanation

Answer: C

The first transfer gives primary consumers 1,000 kJ. The second gives secondary consumers 100 kJ. The initial 10,000 kJ belongs to producers. Ten kJ would follow a third transfer. The calculation assumes 10% efficiency at each step, rather than claiming universal measured efficiency.

Q22. East is positive. Velocity changes from −10 m/s to −14 m/s in 2 seconds. Which statement is correct?

Show answer and explanation

Answer: D

Acceleration is [−14 − (−10)] ÷ 2 = −2 m/s². Speed increases from 10 m/s to 14 m/s. Both velocity and acceleration point west. A negative acceleration does not necessarily mean slowing down.

Sources: NCERT; OpenStax

Q23. A photon has a momentum of 10 MeV/c, where c is the speed of light. What is this photon’s energy?

Show answer and explanation

Answer: A

For a photon, energy equals momentum times the speed of light: (10 MeV/c) × c = 10 MeV.

Q24. Repeated readings are 9.80, 9.81 and 9.80 cm for a reference length of 10.00 cm. What do they illustrate?

Show answer and explanation

Answer: B

The readings are closely grouped, showing good repeatability in this example. They are consistently below the reference value. A shared offset can make precise readings inaccurate. Averaging helps with random variation but does not automatically remove this offset.

Q25. Regarding Young’s modulus and elasticity, which is correct?

Show answer and explanation

Answer: A

A material’s Young’s modulus rises with its elasticity, and since steel has a higher Young’s modulus than copper, steel is the more elastic of the two.

Beyond the answer

    Share your thoughts

    ✨Ask doubt
    ✨ Ask a Question AI×

    MCQ Question is an independent study site, not affiliated with any government body or exam authority. Official sources: UPSC upsc.gov.in · SSC ssc.gov.in · NCERT ncert.nic.in · PIB pib.gov.in

    WhatsApp support: +91 9319788829