What does Radar Cross-Section (RCS) measure?

How strongly an object reflects radar signals back to the transmitter. Warner, in a 1999 Air University Press study, says RCS is a basic measure of how a target reflects or scatters the incoming radar wave. MIT Lincoln Laboratory defines it as the area that would return the same received power if it radiated equally in all directions. So it measures the strength of the echo sent back to the transmitter. Warner says a larger RCS makes the target easier to detect. The surface-area option confuses RCS with size, and Warner says corner reflectors can make small vehicles appear very large to a radar. Altitude and frequency band are not what RCS measures.

What happens to the radar energy that radar absorbing material (RAM) absorbs?

It is transformed into heat. Warner says RAM dissipates radar energy much as an electric resistor turns electricity into heat. A 2018 Scientific Reports paper says RAM is capable of transforming electromagnetic energy into heat. Warner adds that the heat is too small for infrared sensors to detect. Neither source says the energy is stored, re-sent, bent around the aircraft or turned into sound.

USNI News reported in 2014 that lower-frequency radars may see a stealth aircraft. What do they lack, according to Pentagon officials?

A weapons quality track needed to guide a missile. USNI News reports that lower-frequency radars do not provide a weapons quality track. Pentagon officials say that track is needed to guide a missile onto a target. An Air Force official said you cannot kill an LO aircraft without a fire control system. Warner's table also lists VHF and UHF for very long range surveillance, and the highest frequencies for fire control. The other options are not what USNI News says.

In the research papers cited in this lesson, what are metamaterial tiles and metasurfaces used for in stealth work?

To reduce radar cross-section by cancelling or redirecting the echo. A 2018 Scientific Reports paper proposes a metamaterial tile for ultra-wideband RCS reduction and diffuse scattering. Phase cancellation between two unit cells moves the scattering into lobes away from the normal direction. A second paper on a metasurface also reports obvious RCS reduction against a metal plate of the same size. Neither paper uses the tiles to increase scattering, raise infrared output or add noise.

In its release of 27 May 2025, what did PIB say the Raksha Mantri approved for the AMCA?

The AMCA Programme Execution Model, with ADA executing through industry partnership. PIB says Raksha Mantri Rajnath Singh approved the AMCA Programme Execution Model. It says ADA is set to execute the programme through industry partnership, with equal opportunities for private and public sectors. Bidders can apply alone, as a joint venture or as consortia. PIB does not say the programme was imported, given to HAL alone, or moved away from ADA. Business Standard reported the same approval on the same date.

According to the Financial Express (28 May 2026) and Moneycontrol (27 May 2026), what does the AMCA RFP require for the prototype's first flight?

Within 30 months of contract signing. Both reports say the RFP requires the first flight of the AMCA prototype within 30 months of contract signing. The Financial Express adds that the 84-month figure is for the 1,800-sortie flight test programme, not for the first flight. Neither report gives a 2027 deadline or ties first flight to series production.

MCQ QuestionsMy progress

In Warner’s study for Air University Press, which method of cutting RCS is called the most effective?

Question 1 of 7

Was this helpful?

In Warner’s study for Air University Press, which method of cutting RCS is called the most effective?

Keep practicing

Beyond the answer

Leave a ReplyCancel reply

Discover more from MCQ Questions