What is a light-year a measurement of?

Distance — the distance light travels in one year. A light-year measures distance: how far light travels in vacuum in one year. The year specifies the travel interval used to define that distance. It does not make the unit a measure of time, temperature or mass.

Which pair completes metre, kilogram, second, ampere and kelvin as the seven SI base units?

mole and candela. The remaining base units are mole for amount of substance and candela for luminous intensity. The other pairs contain derived units. Learn the full seven-unit set rather than treating a short list of common units as complete.

What is 1 cm² expressed in square metres?

0.0001 m². One centimetre equals 0.01 metre. Area contains two length factors, so square the conversion factor. Thus, 1 cm² = (0.01 m)² = 0.0001 m². The 0.01 m² choice incorrectly uses the length factor only once.

Repeated readings are 9.80, 9.81 and 9.80 cm for a reference length of 10.00 cm. What do they illustrate?

Close agreement can coexist with a consistent offset. The readings are closely grouped, showing good repeatability in this example. They are consistently below the reference value. A shared offset can make precise readings inaccurate. Averaging helps with random variation but does not automatically remove this offset.

What does the SI unit symbol H represent?

henry, for inductance. H is the symbol for henry, the SI unit of inductance. Hertz measures frequency and uses Hz. Kelvin uses K. Halogen names a chemical family rather than the SI unit represented by H.

A solid has relative density 19.3. Using water's reference density of 1000 kg/m³, what is the solid's density?

19300 kg/m³. Relative density equals the solid's density divided by the reference density. Multiply the ratio by 1000 kg/m³: 19.3 × 1000 = 19300 kg/m³. The ratio has no unit, but the resulting density does. The reference value is an assumed rounded problem input.

At fixed voltage, a uniform wire's length is halved. Its material, temperature and area stay unchanged. How does its current change?

It doubles. Resistance is proportional to length under these conditions, so it halves. For an ohmic wire, I = V/R. At the same voltage, halving resistance doubles current. This ideal comparison neglects other circuit resistances and meter effects; stretching the wire would be a different change.

Using K = C + 273.15 and F = 1.8C + 32, what Celsius reading makes K and F numerically equal?

Practice

Quick random quizMixed questions, start right away

History

Polity & society

Economy & geography

Science & more

Aptitude

Exams

Study

History

Polity & society

Economy & geography

Science & more

Aptitude

Using K = C + 273.15 and F = 1.8C + 32, what Celsius reading makes K and F numerically equal?

Keep practicing

Beyond the answer

Leave a ReplyCancel reply

Discover more from MCQ Questions